| Pipe joints leak, emergency repairs eleven strokes teach you
|
| Release time：2014.05.08 News source：Taizhou Lixin Pneumatic Tool Plant Browsing number： |
Engine oil leakage how to do fittings, so-called "chronic illness into health," in fact the owner can also have some simple emergency repair methods may be supported at the crucial moment to come to the rescue and so on. Lixin fittings teach you eleven strokes emergency methods:
Trick 1
Morning to launch the car shake
Because working poor individual cylinder, valve closed lax, block 3 or 4 in the high-speed multi-stop run for a while. If the car does not shake, but shift the heat flow, there may be uneven injector fuel injection quantity is required to detect cleaning.
Trick 2
Brake feel easy as before
When a red light vigorously stepped kicks brakes, can be effective.
3 tricks
Vehicle deviation
The direction of the deviation of the front wheel or the other direction to increase the air pressure in the tire air pressure reduction.
Trick 4
Morning found insufficient battery energy ignition, start struggling
Take a bottle of hot water fell on the battery, turn off all electrical equipment, including off the door. Such as 5-10 minutes you can start the ignition, and then go by car to change the battery.
5 tricks
Turn the key to the door handle becomes loose or tight, astringent
Open the front door, on the side you will see a plastic cover, open to see inside a screw loose a few laps from the outside will be able to pull out the lock cylinder, which has a pull button on the handle, pull the elastic adjustment on it. After sealing the door blocked by screws, hand fiddle opened before installation, grease the inside of the cylinder, so that the lock on the door handle and it will ease, restored as ever.
6 tricks
Tank damage
It is noted that the pipe joint Fong, when using the vehicle, especially when driving in areas with poor road conditions, there may occur damage to the tank. If you find that leak from the tank, oil spills can be wiped clean place, with soap or bubble gum coated in oil at the temporary blockage play a role. If conditional, with epoxy adhesive patch, the effect of course is better.
7 tricks
Pipeline rupture
Can be ruptured pipeline rupture when rubbed clean, apply soap, with a cloth or tape wrapped around the pipe rupture and tied tightly with wire and then coated with a layer of soap.
8 tricks
Pipe break
Can find a fit with tubing diameter rubber or plastic tubing pipe sockets when broken. If the socket is not tight enough, then both ends of the wire tied tight to prevent leakage.
9 tricks
Pipe joints leak
When using a motor vehicle, such as engine oil pipe joints leak, mostly flared tubing and tubing nut is not sealed due. Available yarn wound on the edge of the next speaker, then the tubing and tubing fittings and tighten the nut; can also be chewed bubble gum or maltose into a paste, applied to the seat tubing nut mouth, let it dry condensate newcomer seal.
10 tricks
Inlet and outlet hose rupture
Rupture is not available coated with a layer of soap wrapped cloth leaks. As rupture is large, you can cut the hose rupture, put in the middle of a bamboo or iron pipe, and tight wire bundles.
11 tricks
Broken fan belt
According to Fong fittings understand that the broken belt tied with wire in series or using open-open-and-go approach to drive away.
|
| |
|
|
|
|
Name：Taizhou Lixin Pneumatic Tool Plant
Add：Economic Development Zone, Yuhuan City, ZheJiang Province, China.
Mobile：+86-18967648088
+86-18969685855
Fax：0576-87253572
Web：http://www.lxqdgj.com |
|
